- BEARING CORP.
- BEARINGS FOR METRIC AND INCH SHAFT SIZES Cylindrical Roller Bearings Deep Groove Ball Bearings
Home>Products>BEARINGS FOR METRIC AND INCH SHAFT SIZES>Rolling Mills NNU49/530S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES
English
Rolling Mills NNU49/530S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES
100% Authentic. BEARING CORP. Rolling Mills NNU49/530S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES Highest Quality. 4.8 mm Ab - Cage-Cone Frontface Clearance Certified 59.4 G2 - Heat Generation Factor (Rib-Roller End) Supplier.
- Rolling Mills
NNU49/530S.M.C3
- 59.4
- 4.8 mm
- 231.775 mm
- 453.9
- Imperial
- 209000 lbf
- 1.58
- 95000
-
BEARING CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rolling Mills NNU49/530S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZESTechnical information
| G2 - Heat Generation Factor (Rib-Roller End): | 59.4 | Ab - Cage-Cone Frontface Clearance: | 4.8 mm | D: | 231.775 mm |
| G1 - Heat Generation Factor (Roller-Raceway): | 453.9 | Design Units: | Imperial | C0 - Static Radial Rating: | 209000 lbf |
| K - Factor7: | 1.58 | Series: | 95000 | C90 - Dynamic Radial Rating (90 million revolutions)4: | 36700 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6: | 23200 lbf |
Rolling Mills NNU49/530S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZESCross reference
Rolling Mills NNU49/530S.M.C3 bearing Size Chart (mm/inches) | |
|---|---|
| Bearing number | 23184 CJ/W33 |
| Size (mm) | 700x420x224 |
| Bore Diameter (mm) | 700 |
| Outer Diameter (mm) | 420 |
| Width (mm) | 224 |
| d | 420 mm |
| D | 700 mm |
| B | 224 mm |
| d2 | 483 mm |
| D1 | 607 mm |
| b | 22.3 mm |
| K | 12 mm |
| r1,2 - min. | 6 mm |
| da - min. | 446 mm |
| Da - max. | 674 mm |
| ra - max. | 5 mm |
| Basic dynamic load rating - C | 5919 kN |
| Basic static load rating - C0 | 9300 kN |
| Fatigue load limit - Pu | 620 kN |
| Reference speed | 480 r/min |
| Limiting speed | 900 r/min |
| Calculation factor - e | 0.3 |
| Calculation factor - Y1 | 2.3 |
| Calculation factor - Y2 | 3.4 |
| Calculation factor - Y0 | 2.2 |
| Category | Bearings |
| Inventory | 0.0 |
| Manufacturer Name | SKF |
| Minimum Buy Quantity | N/A |
| UNSPSC | 31171510 |
| Weight / Kilogram | 0 |
| EAN | 7316570235654 |
| Product Group | B04311 |
| d2 ≈ | 483 mm |
| D1 ≈ | 607 mm |
| r1,2 min. | 6 mm |
| da min. | 446 mm |
| Da max. | 674 mm |
| ra max. | 5 mm |
| Basic dynamic load rating C | 5919 kN |
| Basic static load rating C0 | 9300 kN |
| Fatigue load limit Pu | 620 kN |
| Calculation factor e | 0.3 |
| Calculation factor Y1 | 2.3 |
| Calculation factor Y2 | 3.4 |
| Calculation factor Y0 | 2.2 |
| Mass bearing | 350 kg |
Rolling Mills NNU49/530S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES Cad Models
Contact Us
- BEARING CORP.
- Address2086 Military Street South, Hamilton, AL 35570, U.S.A.
- Phone(Working Time)921-6359
- Fax
Related News
| Can I use WD40 on skateboard bearings? |
| Can roller bearing take axial load? |
| Can you clean bearings with WD40? |
Timken 18790 Bearing
FAG 522310 BEARINGS FOR METRIC AND INCH SHAFT SIZES
Rolling Mills 60/530MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES
Rolling Mills 580180 BEARINGS FOR METRIC AND INCH SHAFT SIZES
FAG 527021 BEARINGS FOR METRIC AND INCH SHAFT SIZES