- BEARING CORP.
- BEARINGS FOR METRIC AND INCH SHAFT SIZES Cylindrical Roller Bearings Deep Groove Ball Bearings
Home>Products>BEARINGS FOR METRIC AND INCH SHAFT SIZES>Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZES
English
Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZES
How 25 mm B do I place an EMERGENCY 200x260x25 2 mm b order for a Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZES that I want to pick up at a BEARING CORP. our store?
- Rolling Mills
800942
- 260 mm
- 25 mm
- 2 mm
- 25
- 260
- 200x260x25
- 200
- 84,2 kN
-
BEARING CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZESTechnical information
| D: | 260 mm | B: | 25 mm | b: | 2 mm |
| Width (mm): | 25 | Outer Diameter (mm): | 260 | Size (mm): | 200x260x25 |
| Bore Diameter (mm): | 200 | Basic dynamic load rating (C): | 84,2 kN | a: | 3,5 mm |
| Brand: | ISB |
Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZESCross reference
Rolling Mills 800942 bearing Size Chart (mm/inches) | |
|---|---|
| d | 0.1900 in |
| ball material: | Alloy Steel - heat treated - chrome plated |
| misalignment angle: | 20 ° |
| radial static load capacity: | 2079 lbs |
| shank thread length: | 0.5000 in |
| lubrication: | Unlubricated |
| rod end type: | Female Threaded with Male Stud |
| head diameter: | 0.6250 in |
| shank thread size: | 10-32 |
| head width: | 0.2340 in |
| thread direction: | Right Hand |
| ball width: | 0.3120 in |
| grade: | Economy/General Purpose |
| length to ball center: | 1.0620 in |
| lubrication type: | No Fitting |
| standards met: | SAEJ1120 |
| housing material: | Carbon Steel - Corrosion Resistant Plating |
| series: | CF |
Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZES Cad Models
Contact Us
- BEARING CORP.
- Address2086 Military Street South, Hamilton, AL 35570, U.S.A.
- Phone(Working Time)921-6359
- Fax
Related News
| Can I use WD40 on skateboard bearings? |
| Can roller bearing take axial load? |
| Can you clean bearings with WD40? |
Timken 18790 Bearing
FAG 522310 BEARINGS FOR METRIC AND INCH SHAFT SIZES
Rolling Mills 60/530MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES
Rolling Mills 580180 BEARINGS FOR METRIC AND INCH SHAFT SIZES
FAG 527021 BEARINGS FOR METRIC AND INCH SHAFT SIZES