- BEARING CORP.
- BEARINGS FOR METRIC AND INCH SHAFT SIZES Cylindrical Roller Bearings Deep Groove Ball Bearings
Home>Products>BEARINGS FOR METRIC AND INCH SHAFT SIZES>Rolling Mills 22216E BEARINGS FOR METRIC AND INCH SHAFT SIZES
English
Rolling Mills 22216E BEARINGS FOR METRIC AND INCH SHAFT SIZES
Can't KOYO Brand find what you're looking BEARING CORP. 4 mm r min. for 400x540x112 Rolling Mills 22216E BEARINGS FOR METRIC AND INCH SHAFT SIZES ? Our expert BEARINGS FOR METRIC AND INCH SHAFT SIZES Representatives be in contact with you shortly!
- Rolling Mills
22216E
- 483 mm
- KOYO
- 4 mm
- 535 mm
- 112
- 400x540x112
- 400 mm
- 78.0 Kg
-
BEARING CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rolling Mills 22216E BEARINGS FOR METRIC AND INCH SHAFT SIZESTechnical information
| da min.: | 483 mm | Brand: | KOYO | r min.: | 4 mm |
| d1: | 535 mm | Width (mm): | 112 | Size (mm): | 400x540x112 |
| d: | 400 mm | Weight: | 78.0 Kg | Outer Diameter (mm): | 540 |
| D1: | 405 mm |
Rolling Mills 22216E BEARINGS FOR METRIC AND INCH SHAFT SIZESCross reference
Rolling Mills 22216E bearing Size Chart (mm/inches) | |
|---|---|
| d | 20 mm |
| radial static load capacity: | 830 lb |
| D | 42 mm |
| bearing material: | Steel, Ceramic |
| B | 12 mm |
| maximum rpm: | 830 RPM |
| contact angle: | 15 ° |
| finish/coating: | Uncoated |
| internal clearance: | C0 |
| outer ring width: | 12 mm |
| ball screw application: | Not for Ball Screws |
| fillet radius: | 0.6 mm |
| closure type: | Open |
| series: | 2MMV9100HX |
| precision rating: | ABEC 9/7 (Non-Critical Features) |
| standards met: | ABMA |
| radial dynamic load capacity: | 2160 lb |
Rolling Mills 22216E BEARINGS FOR METRIC AND INCH SHAFT SIZES Cad Models
Contact Us
- BEARING CORP.
- Address2086 Military Street South, Hamilton, AL 35570, U.S.A.
- Phone(Working Time)921-6359
- Fax
Related News
| Can I use WD40 on skateboard bearings? |
| Can roller bearing take axial load? |
| Can you clean bearings with WD40? |
Timken 18790 Bearing
FAG 522310 BEARINGS FOR METRIC AND INCH SHAFT SIZES
Rolling Mills 60/530MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES
Rolling Mills 580180 BEARINGS FOR METRIC AND INCH SHAFT SIZES
FAG 527021 BEARINGS FOR METRIC AND INCH SHAFT SIZES